Sourcing Strategy at General Mills - 690 Words

Developing a sourcing strategy is vital with my new â€Å"buyer† position at General Mills. I need to consider what General Mills is looking for and what best suits their company. The first step I need to take in developing a sourcing strategy is to conduct an assessment of General Mills current spending. According to General Mills’ Annual Report, the payments due in 2014 are $3,844,200. This amount includes long term debt, accrued interest, operating leases, capital leases, and purchase obligations. At this time, General Mills can expect to spend $2,730.70 on cocoa each month. The second step will be assessing the supply market and discovering who offers what. General Mills is a member of the World Cocoa Foundation, which helps create contact with cocoa farmers, origin governments, and environmental organizations. It is very important to consider environmentally and labor friendly options when developing my sourcing strategy for cocoa beans. General Mills does not want to risk partnering with an unethical cocoa farmer who violates labor laws using young children or putting the workers through harsh conditions. Next I will need to conduct a total cost analysis to see how much it would be to purchase cocoa. The monthly cost of cocoa beans fluctuates monthly. In January, 2010 cocoa beans were being sold at their highest- $3,525.12. Currently, cocoa beans are sold for $2,730.20. It may be wise to purchase a larger amount of cocoa beans when the cost of them declines, to saveShow MoreRelatedMarketing Plan For Quality Freelance Writing Company Essay1480 Words   |  6 PagesContent Company Marketing Plan Quality Freelance Writing Companyâ€Æ' Table of Contents Topic Page # Company Description 3 Business Mission 4 Situation Analysis (SWOT Analysis) 5 Objectives 10 Marketing Strategy 12 Implementation, Evaluation and Control 21 Summary 24 Works Cited 25 Company Description GreaterThings Freelance Content Company (GreaterThings FCC) is a writing company that provides quality blog and websiteRead MoreGeneral Mills It3528 Words   |  15 PagesCorporate Information Technology Assessment of General Mills MGT 6530-Managerial Application of Technology The College of Saint Scholastica Executive Summary General Mills is one of the largest food companies in the world, and uses an extensive array of information technology (IT) to support its day-to-day operations. This paper focuses on three primary IT areas within General Mills: supply chain, data retention and marketing. Specific technologies reviewed for this assessment includeRead MoreLi Fung1747 Words   |  7 Pageschain; • Adopt information technology to optimize the operation of the supply chain; • Shorten production lead time and delivery cycles; and • Lower costs in sourcing, warehousing and transportation LF believes that these core principles are key factors for success in managing a global supply chain. Using the principles, LF developed strategies in dispersed manufacturing, a global supplier network, customer-centric organizational structure, and the Internet. Dispersed manufacturing meant that theRead MoreBusiness Case Analysis of Mass Merchandisers1506 Words   |  6 Pagessalary of $100k. If complete a reduction in workforce for all of WWAV’s sales team, we can achieve $26M in savings for each year post acquisition. Furthermore, there will also be redundancies at the executive level with overlap of Executive VP of Strategy Corporate Development, Executive VP of HR, CFO, and segment President. If eliminated, these positions together would account for $18.1M annually. While we are cutting a large section of the executive team, we are interested in maintaining theRead MoreCost of Quality2309 Words   |  10 Pages whose company is doing the export. Export houses earn foreign exchange for the country, so it becomes mandatory to have good quality control of their products. In the garment industry quality control is practiced right from the initial stage of sourcing raw materials to the stage of final finished garment. For texti le and apparel industry product quality is calculated in terms of quality and standard of fibres, yarns, fabric construction, colour fastness, surface designs and the final finished garmentRead MoreMarketing Plan For A Business Level Strategy1089 Words   |  5 PagesWhiteWave has pursued a variety of strategies to support its unprecedented growth. Business-level Strategy Across its various business groups and within each of its brand, WhiteWave tends to follow a focused differentiation strategy to achieve above average returns. The target markets for many of its products, while growing, tend to be narrower. In addition, it creates value for customers by providing distinctive products. The advantages of a focused differentiation strategy include increased loyalty fromRead MoreCpw and Kelloggs6179 Words   |  25 Pagescapabilities; General Mills and Nestlà ©, CPW plans to take further steps towards stronger global sales and integrated global marketing. In a saturated consumer product industry, the company aims to develop a blue ocean strategy through developing strategic core competencies and an international competitiveness in order to outperform its competitors and achieve further growth. Taking the US and Canadian markets out of the equation, the paper aims to find effective global marketing strategies that empowerRead MoreBackground Inditex, One of the Worlds Largest Fashion Distributors, Has Eight Major Sales Formats - Zara, Pull and Bear, Massimo Dutti, Bershka, Stradivarius, Oysho, Zara Home Y Kiddys Class- with 3.147 Stores in 70100262 Words   |  402 Pagesdirect hierarchical control and influence. This thesis is about the intersection between Corporate Social Responsibility (CSR) and Supply Chain Management. That is, the point when an issue on a focal company’s CSR agenda becomes an issue for its sourcing, purchasing and supply management operations. I use the term upstream CSR when I refer to this phenomenon. I define upstream CSR as the management of environmental and social aspects that are determined, or occur, upstream within the supply chainRead MoreSummer Internship Report on Madura Garments6439 Words   |  26 Pagescome in during the Trade shows held twice a year 6 months prior to the launch of a season (Spring-Summer or Autumn-Winter). Sourcing and production plan for those channels so are essenti ally done against fixed orders. But for Institutional Channel orders are not predetermined and customers come in with orders with very short lead time. This makes sourcing and manufacturing strategy for this process completely different from traditional channels. Currently the company Madura Garments (for referenceRead MoreSummer Internship Report on Madura Garments6431 Words   |  26 Pagescome in during the Trade shows held twice a year 6 months prior to the launch of a season (Spring-Summer or Autumn-Winter). Sourcing and production plan for those channels so are essentially done against fixed orders. But for Institutional Channel orders are not predetermined and customers come in with orders with very short lead time. This makes sourcing and manufacturing strategy for this process completely different from traditional channels. Currently the company Madura Garments (for reference and

Human Relations Bad/ Good Experience Free Essays

On Tuesday Sept. 5 I signed my daughter up for cheerleading at Jefferson elementary school. Upon arriving you are required to pay $60. We will write a custom essay sample on Human Relations Bad/ Good Experience or any similar topic only for you Order Now 00 for sign up and also a $7.00 registration fee, pom poms are $25.00 and the uniform is $50.00. According to the flier there is a team for girls between the ages 5-7 and another for the ages 8 and over. During practice I noticed that the other girls were much younger and also shorter then my daughter and I felt it would be a better fit for my daughter to cheer with the older girls. I asked the coach since my daughter will be turning 8 years old next month if she could join the team with the older girls, The coach â€Å"said no , I was very upset, so I requested my money back. My money was returned and I found a new cheerleading program for my daughter with a more understanding coach. Good experience On Wednesday Sept.6 I went to the Taco Bell located in Alhambra Ca just off Fremont street. I ordered several taco’s with no tomatoes and 2 small drinks to go. When I arrived home and begun to eat my food I noticed the tacos had tomatoes. I called the taco bell to inform them a mistake was made on my order. The manager was very apologetic and asked if I could come back to the restaurant to replace my order, â€Å"I agreed. When I arrived I asked for the manager he replaced my order and gave me 3 free tacos and a coupon for a free meal. I was very thankful and will continue to shop there. How to cite Human Relations Bad/ Good Experience, Essay examples

Marketing of Mondelez International-Free-Samples-Myassignmenthelp

Question: Discusss about the Sustainable Management and Marketing of Mondelez International. Answer: Introduction Mondelez International is a widely known American confectionary, food and beverage company that produces gum, powdered beverages, confectionery, and biscuits (Berg 2016). The employee strength of the company is about 90,000 and it has been headquartered in USA. The product portfolio of Mondelez International includes several billion-dollar brands like Stride, Trident, Oreo, Cadbury and Halls and with the same; the brand has consumers from 165 different countries (Fernandes, Gupta and Vidyasagar 2016). This paper is going to elaborate on analyzing its macro and micro environmental factors through marketing mix and SWOT analysis. It shall further shed light on the sustainable marketing initiatives taken by this company and will suggest few strategies and principles that it could be used by it in order to improve its business. Discussion Marketing Mix Product The company has large array products and maximum of its products are been gained by its merger with the brand Cadbury. Cadbury has generated a large number of cash cows in its range of products. Perk, Dairy Milk, Bourneville, Five Star, Cadbury clairs are some of the popular products in the chocolate business (Pai and Subramanian 2014). Under the segment of biscuits, the company has launched Oreo in the year 2010 that is indeed gaining a market share at a very rapid pace, covering up more than 100 crores in the revenues. Under the beverage segment, bournvita again is the major leader in the milk additives. Along with that, the mouth freshener or the remedy for cold and cough- Halls, is used by the people all over India. Because of such a huge range of products in its portfolio, Mondelez is one of the leading names in the field of chocolates, all over the world. Price Along with the quality of the product, there comes the price that Mondelez too considers to a great extent. Since the quality of all its products are high as well as the Oreo biscuit and bevarages too requires a continuous marketing in the market to remain on the top, the product price of the Mondelez is also quite high for some products of it (MacGregor et al. 2016). However, for the other products that need less or no marketing, the prices are much low and reasonable enough. Because of its positioning, Dairy Milk is regarded as one of the most premium brands of chocolates, but as its price is much low than the other premium chocolates, it is accepted by near about each of the target segments (Shrivastava 2016). There are varieties of product of Mondelez and depending on the type of consumer who are going to buy them, their pricing are set accordingly. Distribution strategy- The distribution strategy of the company is really fantastic and is at the same time, widespread as well. The product of the company is available in all the urban areas including the A, B and C category of towns. It also follows the same strategy of FMCG. The products are available globally at every vending machines, grocery stores, wholesale clubs, drug stores, malls, hospitals and department stores. It could be bought from the online stores like Big basket, eBay and Amazon as well. It has a very effective distribution network. It has distributed all its products in foreign markets including India. All the major developing countries and cities are covered by the distribution network of the company. Promotion The product promotion of the company is done through television advertisement, magazine advertisements and through billboards. The main aim of the company is to manufacture such products that would be enjoyed by everyone (Mythily 2015). It targets the kids aging from 2 to 15 years to the youngster and old people as well. Most of its advertisements are animated so as to appeal the imagination of the kids. However, the promotion of different product is different. For the promotion of Bourneville, the company has kept a position that- You dont buy a Bourneville, you earn it. The Cadbury celebration has a good customer base, where the chocolates are brought in huge amount and are given to the employers, vendors and clients (SB and Sailaja 2014). marketing. SWOT analysis Strengths Mondelez has built a strong dealer and distributor community within few years of its emergence and this has made the dealers to invest in training their sales executives for pitching different consumers in different unique ways. In has recently invested in the Global Research and Development Hubs in Poland, Brazil, Mexico and India, that is helping them in recruiting better candidates as well as retaining and developing talents across a huge range of fields. As discussed above, it has billion dollar brands such a Cadbury Dairy milk, Oreo, Milka, Trident gum, Halls candy and Toblerone etc. These brand are aiding to revenue for Mondelez (Pai and Subramanian 2014). Weaknesses There is a fluctuation in the EPS (Earning per Share). The EPS was decreased by 76.4% in the year 2016 and was increased by 246.9% in the year 2015. Such a fluctuation suggests that there is unevenness in the execution of the strategies. From the below mentioned graph, it can be depicted that there was a notable decline in the total revenue in the year 2016 by 10.5% and in the year 2015 by 13.5% (Das nair, Nkhonjera and Ziba 2017). Graph: Revenue history of Mondelez (Das nair, Nkhonjera and Ziba 2017) Opportunities There is a significant reduction in the sales of biscuits in Latin America. In the year 2016, it was reduced to 734 million dollars from 1605 million dollars, which was about 54%. Hence, the company can increase its sales of biscuit in Latin America.. The company can also diversify its product portfolio by adding into it other segments such as that of snacks. Mondelez can expand its business in other developing nations (Leonidou, Katsikeas and Morgan 2013) Threats The growing strengths of the local distributers Increase in competition in the modern business market among the competitors, some of its major competitors is Mars, Hershey and Cargill and they truly have a powerful brand reputation in the market (Leonidou et al. 2013). The cost of the products used to make the company products is rising along with increase in fuel cost, labor cost, distribution cost etc (Tate et al. 2014). This is resulting in reduction of the margins of the brand. Company position among the other three Among Barry Callebaut, Hershey and Cargill, Mondelez is ranking number two after Hershey. It is the second leading chocolate manufacturing companies after Hershey. Sustainable marketing principles The company has launched a website for its customers called the DearCadbury.com, with an aim to make its customers aware regarding ethical sourcing and the environment (Sakas, Vlachos and Dimitris 2014). Targeted at the customers, schools and its own workers, Mondelez is making sustainability as major part of its long-term strategy with a hope that the website will reflect this. The company also considers the needs of each of its customers, right from the kids to the older ones or say, from the impulse purchase to the family treats (Casadesus, Masanell and Zhu 2013). Mondelez designs its products to coincide with the Easter, Christmas, Fathers and Mothers day and various other calendar landmarks. Cadbury also uses the Choose Cadbury marketing strategy in order to encourage a relation between these events and the chocolates. Furthermore, the company follows distribution strategy. Though the company is following FMCS, still it is unable to make its products available in some of the urban and rural regions. However, it makes its products available through the CF from the wholesaler or the retailers to the end users and this is a three tier distribution approach. Conclusions From the above analysis it is clear that Mondelez is indeed a leading American confectionary, food and beverage company that has the potential to become the top most company in the list of the best food and beverage companies. However, based on the above analysis there are few recommendations made below: Single marketing strategy is not sufficient in order to achieve the strategic objectives in such a contemporary business environment. Hence, Mondelez should apply the mixture of strategic marketing models whose optimal combination would rely on individual conditions in particular to targeted markets of the individual. It must differ in its strategic approaches depending on different individual market. References: Berg, B., 2016.As sweet as it gets: Corporate social responsibility in the confectionery industry(Doctoral dissertation, Quinnipiac University). Casadesus?Masanell, R. and Zhu, F., 2013. Business model innovation and competitive imitation: The case of sponsor?based business models.Strategic management journal,34(4), pp.464-482. Das Nair, R., Nkhonjera, M. and Ziba, F., 2017. Growth and Development in the Sugar to Confectionery Value Chain. Fernandes, S.F., Gupta, P. and Vidyasagar, A., 2016. Cadbury IndiaSweet Turning Sour.Ushus-Journal of Business Management,15(4), pp.37-54. Leonidou, C., Katsikeas, C., Morgan, N. 2013 "Greening" the marketing mix: do firms do it and does itpay off?. Journal of the Academy of Marketing Science, 41(2), 151-170. Leonidou, L.C., Leonidou, C.N., Fotiadis, T.A. and Zeriti, A., 2013. Resources and capabilities as drivers of hotel environmental marketing strategy: Implications for competitive advantage and performance.Tourism Management,35, pp.94-110. MacGregor, J.F., Liu, Z., Bruwer, M.J., Polsky, B. and Visscher, G., 2016. Setting simultaneous specifications on multiple raw materials to ensure product quality and minimize risk.Chemometrics and Intelligent Laboratory Systems,157, pp.96-103. Mythily, G., 2015. A SURVEY ON CONSUMER BUYING BEHAVIOR AND BRAND AWARENESS OF CADBURY AMONG STUDENTS IN SCHOOL AND COLLEGE CANTEENS IN CHENNAI.International Journal of Management Research and Reviews,5(12), p.1204. Pai, V.S. and Subramanian, R., 2014. Kraft Foods, Inc. in IndiaThe Cadbury Acquisition.Asian Case Research Journal,18(02), pp.371-399. Sakas, D., Vlachos, D. and Nasiopoulos, D., 2014. Modelling strategic management for the development of competitive advantage, based on technology.Journal of Systems and Information Technology,16(3), pp.187-209. SB, P. and Sailaja, M.V., 2014. Consumer Involvement in Brand Positioning (A Study on ITC FMCG Products at Organized Retail outlets).International Journal of Scientific Research and Management,2(6). SHRIVASTAVA, A.K., 2016. COMPARATIVE ANALYSIS OF FAST MOVING CONSUMER GOODS: AN EMPIRICAL ANALYSIS OF CADBURY AND NESTLE.Global Journal of Multidisciplinary Studies,5(3). Tate, W.L., Ellram, L.M., Schoenherr, T. and Petersen, K.J., 2014. Global competitive conditions driving the manufacturing location decision.Business Horizons,57(3), pp.381-390.

Writing Style Scarlet Letter Essay Example

Writing Style Scarlet Letter Essay Perhaps the foremost purpose of The Scarlet Letter is to illustrate the difference between shaming someone in public and allowing him or her to suffer the consequences of an unjust act privately. According to the legal statutes at the time and the prevailing sentiment of keeping in accordance with a strict interpretation of the Bible, adultery was a capital sin that required the execution of both adulterer and adulteressor at the very least, severe public corporal punishment.Indeed, even if the husband wanted to keep his wife alive after she committed adultery, the law insisted that she would have to die for it. It is in this environment that Hester commits adultery with Dimmesdale, but we come to see that the public shaming cannot begin to account for all the complexities of the illicit relationshipor the context of it. What Hawthorne sets out to portray, then, is how the private thoughts, the private torture and guilt and emotional destruction of the people involved in the affair, are more than enough punishment for the crime.We wonder whether the state or society has any right to impose law in private matters between citizens. Does adultery really have no impact upon the lives of others? If not, it should not be seen as a crime against the village. A more charitable reading of the Bible would come later in reflections on the New Testament interpretation of adultery law, namely, that the public need not step in to punish a crime when we ourselves have our own sins to be judged. Each person suffers enough already for his or her own sins. The Scarlet Letter has an incredibly unique style.Hawthorne uses key writing styles to get the main themes across in his novel: natural law vs. conventional law. Hester broke a conventional law, but she did not brake a natural law. Hawthornes style is Vague at best. There are many passages in the novel that are left open to interpretation, making the Scarlet Letter romantic. Hawthorne asks many rhetorical questions throughout the passages, incorporating readers even more into the novel. Also, he has exceptional grammar usage, carefully placing multiple commas, elongating his already complex sentences.Hawthorne incorporated various sentence structures into his novel, like the parallel construction with correlative conjunctions. He places contradictory phrases throughout his sentences, creating a sense of mystery. He has an accelerated vocabulary usage, at times stopping the reader in his or her tracks to define the word. Hawthorne wrote this novel around 100 years after the time period that the novel takes place in, so readers would need some explanation on the culture.Hawthorne incorporates a unique narrator position, randomly having statements in the passage. Hawthorne also displays a strong use of symbols. In order to show the importance of such symbols, it is necessary to use many figures of speech. There are passages where Hawthorne will use personification to make nature come alive and heed to Pearl , Hesters daughter. Hawthornes unique language makes him capable to pursue unique routes to enter the readers and capture their minds.

5 Basic Rules for Having Roommate Guests

5 Basic Rules for Having Roommate Guests Its a rare college roommate situation where neither person brings over a guest at any time during the entire academic year. More likely, one or both roommates have someone over - for the night, for the weekend, for a day or two. Having a few basic rules in place in advance, however, can help everyone avoid awkward situations, hurt feelings, and overall frustration. What to Know Before You Have Guests Rule 1: Notify as far in advance as possible. If your parents are coming to visit for Family Weekend, let your roommate(s) know as soon as you can. That way, the room can be clean, things can be picked up, and embarrassing items can be put away if necessary. If your guest shows up as a surprise - e.g., your boyfriend drives up to surprise you for the weekend - let your roommate know before they come home. A simple phone call or text message can at least give them a heads up that youll be having company for a little while. Rule 2: Know whats okay to share - and not. Most roommates dont mind if you borrow something from time to time. A squeeze of toothpaste here or some hand soap there wont bother most folks. A used towel, eaten breakfast food, and laptop surfing can easily send the calmest roommate into orbit, however. Know what your roommate is willing to share and let your guest know as soon as possible. Even if youre in class while your guest eats the last of your roommates cereal, its your responsibility to fix the problem. Rule 3: Have a limit on how long people can stay. Its reasonable to expect a roommate to accommodate the unique factors of your personal life. Your mom might call too often, for example, or you might have an annoying habit of hitting the snooze button one too many times in the morning. Having a guest stay for too long, however, is not something you can reasonably expect your roommate to adapt to. Its their place too, after all, and they need their regular time and space to focus on school. Respect your shared environment and make sure your guests leave before they overstay their welcome. Rule 4: Make sure your guest leaves things exactly how he or she found them. If your guest wants to be a good house guest, they should be respectful of everything in your shared living environment. That means cleaning up after themselves, whether in the bathroom or the kitchen. The last thing you need is for your guest to be disrespectful and leave a mess behind. Ask your guest to make sure to clean up after him- or herself, and if they dont, make sure you do as soon as possible. Rule 5: Be clear on how frequently guests can visit. Okay, so all of your guests are dreamy. They dont stay too long, they tell you theyre coming in advance, they clean up after themselves, and they respect your roommates stuff and space. That can all be true, and yet ... you can simply have guests over too often. If people are over every weekend, for example, that could easily become wearisome for your roommate(s), who might simply start craving the ability to wake up on a Saturday morning and not have to deal with the company. Talk to your roommate not only about guest specifics but also about patterns. How much is too much? How many are too many? Being clear from the beginning and checking in throughout the year can make sure that you and your roommate continue to have a good roommate relationship - guests and all.

Analysis Power of Computers Essay -- Computer Technology

Keywords- Family Similarity Recognition, Facial Feature Extraction, Face Detection, PCA, Image Database. I. INTRODUCTION Over the last thirty years or so, face recognition is an active research area in computer vision and one of the most successful applications of image analysis and understanding. Different algorithms have been proposed by researchers for solving this problem and many of them are considered as the state of the art. Nowadays, the face recognition problem is not only important in the research area, but it is vital in the commercial applications. A general statement of the face recognition problem can be formulated as follows: Given still or video images of a scene, identify or verify one or more persons in the scene using a stored database of faces. Due to this definition well-known algorithms such as PCA [24], ICA [1], LDA [28], EBGM [27], B... ... middle of paper ... ...e considered for it. For example, humans use terms such as "entire face of person A is similar to person B" or "eyes and eyebrows of person A are similar to person B" or "profile view of person A is similar to person B" to express the similarity criteria between people. With respect to these observations, three features are utilized in the proposed method include: "The Whole Face", "The Facial Features’ Perimeter" and "The Ratio between Facial Features". These features are selected from the frontal and side view images. The facial features’ perimeter includes forehead, eyebrows and eyes, nose, mouth, chin and cheek. The ratios between facial features’ point can be calculated from the distances that are evident in Figure 1. Utilizing ratio instead of distances between the facial features' point eliminates the dependency to the image scale. These ratios are as follow:

Nike (Training and Development) Research Paper Example | Topics and Well Written Essays - 1000 words

Nike (Training and Development) - Research Paper Example The success of Nike in the industry has driven most research into the training and development processes that the company employs. In most of these research studies, the company’s culture in Nike has been pointed out as a key cornerstone in the training process of the company. In perspective, the corporate culture of the company contributes a great deal to the quality of employees that the company gets in any recruitment process, and the way in which they develop ton match the requirements of the company. In addition, it studies note that more than ever, most intellectuals in marketing and other fields desire to work for the company, notably because the brand has a unique place in the market, dressing even the most elite performers in the athletics field. What is unknown to many however is the corporate culture which the employees breathe and work from, that is the main foundation of the learning and training in the company. At the company’s headquarters in Portland, it is easy to note that every building in the compound is named after a famous athlete that the company associates with (Donnelly 44). For example, the name of Michael Jordan, one of the most famous basketball players in history stands tall in one of the buildings, to whom Nike designed the first running shoes with a sponge in their soles. Further, the name of Mia Hamm, one of the most famous women footballers in history stands in the Nike Campus, to whom the company designed various sports shoes as well as the outfit for most of the games she played. In perspective, there are more than twenty excellent athlete names in the Nike College, which builds the Nike campus with a unique competitive spirit, that enables the company’s employees to grow, get inspired and work towards maintaining the greatness of the company. Further, Nike commits itself to enable the top management to be instruments that facilitate the company’s growth. The leaders in the company are trusted to pr ovide training and learning opportunities to employees and senior managers in order to bring out the talents and capabilities that lie within them. This involves engaging the staff in a way that helps them to achieve quality and produce better output in their capacities, which may be termed as talent multiplication (Goldman, and Papson 61). Thus, the company aims at bringing the best out of their workforce through training and development of the leaders in the hierarchy of management. In addition, the company’s major headquarters in the world is endowed with state of the art gym facilities, designed for use by the employees of the company. For example, the headquarters in Oregon has adequate training facilities, that the employees attend fitness classes, perform various running exercises and bike racks, on which the employees can spend their evenings or lunch breaks practicing. The company’s human resource manager alleges that this enables the employees to live in a Ni ke Spirit, and enables the company to maintain employees who are passionate about sports and the company’s products. Nike employees therefore constitute of a team of persons who care about sports and the company benefits by instilling a culture of sports, that encourages the employees to learn more in their fields of competence in respect to the

Financial Crisis 2007-09 Case Study Example | Topics and Well Written Essays - 250 words

Financial Crisis 2007-09 - Case Study Example Other factors include surge in subprime mortgages as an answer to high housing speculation and growth of the bubble. The main culprits were lenders, because they were responsible for lending funds without taking into consideration the risk of defaulting. After the central bank lowered interest rates and flooded the market with cash. The lenders, like investors, had ample capital to lend, and more willingness to undertake extra risk to increase their returns. The financial crisis commenced in the US and spread throughout the world. The failure of Lehman Brothers teaches us the importance of risk management because this institution had invested in risky securities loosing much value after the U.S housing bubbles. In addition, the crisis teaches us that it is important to retain the confidence of the financial market because once shattered, it becomes difficult to restore. When such confidence is shattered, it can lead to a full-blown confidence crisis in the entire word. The housing bubble resulted from the enormous savings from developed countries, and the low interest rates that existed in the U.S. Due to the available funds, there was demand for high-yielding investments leading to the housing bubble. Some small banks in the US reduced lending; therefore, governments and consumers could no longer borrow and spend before the crisis. Businesses also had to reduce their workforce because the recession meant less funds. The credit crunch deepened as the losses increased

I hold my duty as i hold my soul both to my God Essay Example for Free

I hold my duty as i hold my soul both to my God Essay Polonius statement, found in Act Two, Scene Two, reflects the symmetry and order of the society he lives in. He inhabits a world of certainty and medieval convention. The play can be seen to challenge the statement, both in the action and in the characters, particularly in the character of Hamlet himself. It is Hamlet, the renaissance man of the play, whose controversial attitude is constantly seen to challenge the medieval certainties that could still be seen in Jacobean society. Value was placed on duty to the monarch and to God; the institution of marriage was sacred and scientific reasoning was absolute and definite. All these things are challenged in Shakespeares Hamlet. The social and cultural climate of Jacobean society was such that certainties and conventions were held in high esteem- Shakespeares Hamlet is written in the context of, for example, the social hierarchy of the time, the medieval court, and religion. All of these are challenged in the play by both the characters and the plot. Even the very form of the statement challenges these certainties, for the couplet is a chiasmus- the symmetrical structure reflects the very nature of the society in which Polonius lives. In Shakespeares time society was beginning to ask some of the questions which Shakespeare addresses through the character of Hamlet. Most people embraced a rational, scientific line of thinking Elizabethans were not always heavily superstitious. For example, in Act one, Scene one, Horatio expresses doubt at the existence of the ghost: Before my God, I might not this believe Without the sensible and true avouch Of mine own eyes. They also began to question the old hierarchy and the natural order of things- such as God and gracious king upon the dawn of the Renaissance. The idea of society as a fixed structure and everything being ordained in the world was indeed a strong certainty. Hamlet has a clear vision of things as they are he is a realist, a Renaissance man, unlike characters such as Claudius and Polonius who Shakespeare portrays to be lacking in vision. Shakespeare shows the court to be full of people who think that all these things are absolute simply because they have always been a certain way. Hamlet is also the main vehicle through which Shakespeare conveys his views. Hamlet has indeed been brought up with medieval and religious certainties too. Or that the everlasting had not fixd His canon gainst self- slaughter. A modern audience may very well see Hamlet as being rather tame- a twenty-first century rebel would not acknowledge proprieties such as the divine ban on suicide- but Hamlet seeks more than revenge. He is a melancholy individual, who searches for the answers to some of these questions; through the title statement, Shakespeare challenges his contemporary audience and the modern audience to question these certainties too. Hamlets clear vision is in direct contrast to the other characters, in the sense that he is the only character who is prepared to question these certainties and to try and define, in a sense, what the true meaning of life is, what it is all about. Shakespeare challenges the statement of duty to God and king by implying, through the character of Hamlet that life is underpinned by something other than the monarch and the church. Hamlet is totally aware of the beauty of the world yet at the same time has a pessimistic outlook on the gifts of man as we are all destined to die anyway: What piece of work is a man, How noble in reason, how infinite in faculties, in form and moving how express and admirable, in action how like an angel, in apprehension how like a god: and yet to me what is this quintessence of dust? The character of Polonius is underpinned by values such as duty to God and king- this is illustrated not only in Act Two Scene Two but also in Act One Scene Three: This above all : to thine own self be true, As it must follow the night the day Thou canst not then be false to any man. This quotation illustrates a simplistic outlook on life. The main way in which Shakespeare challenges this outlook is, ironically, in Polonius death. In Act Three, scene four, Polonius is casually and ignominiously killed by Hamlet : O, I am slain. Polonius expresses surprise as much as anything, while Hamlet s words reinforce the irony of Polonius self- importance: I took thee for thy better. Take thy fortune: Thou findst to be too busy in some danger. Polonius is clearly at home in this ordered society and shows a passive acceptance of the status quo. He has a simple medieval outlook on life and clearly values his duty to his God and king; however, he dies by ridiculous accident. Although throughout his life he has clearly endeavoured to serve these two entities to the best of his ability, he still dies an unnatural, brutal death. Shakespeare is therefore illustrating the irrelevance that these values have to life, both in Shakespeares era and now. The statement which Polonius makes in Act Two Scene Two about duty to God and King allows the reader to infer a lot about the character of Polonius and the world in which he lives- he does not seek new experience. These medieval certainties are also challenged in the character of Claudius. He is obviously not on the side of God- indeed, he seems to contradict the very reasoning of the church by the brutal manner in which he murders the king. It is ironic therefore that he seems to declare himself king by divine right as he actually dies with a guilty conscience: Theres such divinity doth hedge a king That treason can but peep to what it would, Acts little of his will. Here it appears that Claudius has conveniently forgotten exactly how he became king. Shakespeare is challenging the idea of kingship. He is showing the court to be full of people who think things are the way they are because they have always been done that way, such as Polonius, Gertrude, Claudius, and Rosencrantz and Guildenstern. The character of Claudius highlights the corruption of the medieval court. The intrigue and machiavellian machinations of the court are self justifying to all these people; for example, Rosencrantz and Guildenstern deceive Hamlet and go behind his back simply because they are serving their king. In Shakespeares time deception and violence were commonplace if they would benefit the king. Although Claudius seems to take the moral high-ground throughout the play he has no good intentions toward Hamlet at all. Shakespeares Hamlet also challenges the institution of marriage- it is shown in the conduct of Gertrude and Claudius not be a sacred union but a justification for excessive promiscuity. Hamlet is distraught by his mothers rapid re- marriage to his uncle after his fathers death: To post with such dexterity to incestuous sheets. Shakespeare invites us then to question the notion of a stable royal marriage, and the values that society had then and the values we have now. Hamlet is disgusted by their sexual excesses and, moreover feels he has been tainted by them: O that this too too sullied flesh would melt, Thaw and resolve itself into a dew. Shakespeare is challenging the morality of the royal marriage- the fact that Gertrude marries the kings own brother shortly after his death seems to suggest the absence of love. In Hamlet, the degree of emotion and true respect in marriage is shown to be weak- it is easily overruled by lust, as the ghost of the previous king states: Let not the royal bed of Denmark be. A couch for luxury and damned incest. Hamlet is an unconventional revenge tragedy- Shakespeare subverts the genre. Hamlet is reluctant to take revenge whereas Laertes is hot- headed, impulsive and ready to avenge the murder of Polonius: It warms the very sickness in my heart That I shall live and tell him to his teeth, Thus diest thou. Shakespeare undermines the concept further by showing that Hamlet is not in fact a coward- his ideas are slightly more subtle. He is indeed hesitant about avenging his fathers murder- he passes up an opportunity to kill Claudius in Act Three, scene four, as he does not want to kill him in an act of redemption. This goes against the traditional idea of medieval and Jacobean revenge: A villain kills my father, and for that To heaven. Why, this is hire and salary, not revenge. This is a challenge to the genre because Hamlet is prepared to bide his time in order to achieve the perfect murder- he wont be spontaneous and impulsive. This is shown by the fact that he passes up an opportunity to kill Claudius. Shakespeares Hamlet has a good degree of relevance to life in the twenty- first century. Although some of the major themes, such as the court and incest, are no longer applicable to modern life, we can relate to some of the underlying themes such as love, sorrow and resentment; we can relate to the emotional distress. Reasoning in Medieval Denmark where the play is set nor indeed in Jacobean society is not so different to our reasoning today- the majority of people today may not believe in ghosts but characters in the play, such as Horatio, and some people in Jacobean society do not believe in ghosts either. In Act one, scene five, Hamlet makes this very thought- provoking comment to Horatio: There are more things in heaven and earth, Horatio, Than are dreamt of in your philosophy. We have our certainties today- in the form of scientific reasoning; but our certainties are equally open and capable of being challenged. One of the main themes in Hamlet is death- we are still uncertain about what happens after we die. The character of Hamlet himself has a romantic, post modernist way of thinking; everything is relative and there are no certainties- only thoughts: Nothing is good or bad. Thinking makes it so. In a sense here Hamlet can be compared to the Romantics. Keats wrote in the context of Shakespeare: Twixt damnation and impassiond clay. (On Sitting Down To Read King Lear) This in a sense is what underpins Shakespeares Hamlet- the idea that whatever certainties are held in any given era will always be questionable, and open to discussion. Our certainties will always be challenged because nothing is definite, or absolute. This romantic concept is based on the idea that this is what life is about- challenging certainties in order to try and discover the ineffable truth about this world and the next.

Jujitsu - The Gentle Art :: essays research papers

To a person not conversant with this art, Jujitsu may be considered as a foul or derogatory term in Japanese. However, Jujitsu us one of the most effective and deadly forms of martial arts taught today. Unique among other forms of combat, Jujitsu holds the position of a â€Å"parent art†, of from which other forms of martial arts such as Aikido, Judo and several Karate styles were extracted. Jujitsu is a combination of all levels of combat. It incorporates chokes, striking, grappling, nerve and pressure point attacks, joint locks, redirection of momentum and throws. The exact origins of Jujitsu are unclear, as most of its history was passed on in the oral tradition. The few early written references show that its origins date back to Japanese mythology, where it is said that the gods, Kajima and Kadori, used Jujitsu to discipline the lawless and wild inhabitants of the Eastern provinces. Therefore, by definition, the art is nearly 2000 years old, however records do exist which show that the art was being practiced as far back as the 8th Century, over twelve hundred years ago. Jujitsu was formalised and most popular during the Edo period of Japan. This was the era of the Samurai. Jujitsu was the Samurai’s main set of combat techniques, after the sword. Jujitsu was a part of the Samurai’s fighting skills, something he could use when he was unable to use his favourite weapon. There are many different styles of Jujitsu that exist around the world, and many different ways to actually spell the name. The original spelling derived directly from the Japanese was Jujitsu. As the popularity and practice of this martial art spread across Europe, the spelling and pronunciation was forced to change. This occurred during World War II, when the name Jujitsu had to be changed to Jiu-jitsu (pronounced Jeeu-jitsu). This name-change occurred because the Germans occupying the area at the time claimed that the name resembled the word â€Å"Jew†, which was illegal to be spoken. Therefore the name was slightly altered so that the art could continue to exist and be taught throughout Europe. Despite the difference is spelling, the meaning of the words is basically the same. The literal meaning of the name is â€Å"the gentle art†, however, since there can be many different translations of Japanese words, â€Å"Ju† can also mean soft, yielding, pliant and flexible, which are all important fundamental principles in this dangerous art.

Warehouse Worker

The pyramids were used as final resting places after the pharaoh’s death. The construction on the pyramids was started soon after the pharaoh ascended to and generally took about 20 years to build. They were aligned with the stars to ensure the pharaoh’s ascension into the afterlife. There is only one known explanation of how the ancient pyramids were built. That explanation is created to Herodotus around the year 425 B. C. Herodotus traveled around Egypt collecting verbal history of this ancient nation. In writing about the construction of the pyramids, he stated: The method employed was to build it in steps, or, as some call them tiers or Terraces. When the base and sub levels were completed, the blocks for the next level were from the ground by means of a cedar sled called a lisch. The sleds were pulled from the quarry to a barge by means of oxen. The blocks of stones was carried up the Nile River on the barge and then unloaded and pulled to the pyramid’s site . Ron Wyatt based his design on the description by Heordotus constructed machines made of wood that easily lift heavy objects. There was a stair case that leads from the opening down to the Royal burial chamber. Here the Pharaoh’s personal belongings and riches were place upon the death of the Pharaoh. This staircase was sealed to prevent grave robbers from finding the royal burial chamber and sometimes fake burial chambers were built to confuse would be grave robbers. The stones were pulled up long ramps to the level that was being constructed. The ramps were at least 3 times and long as they were tall. This made it somewhat easier for the oxen and men to get them into place. Once they reached the level that was needed they were pick up and dropped into place using a contrivances. Upon the death of the Pharaoh’s death, the mummification process was began and this took 60 days. During the Pharaoh’s belonging that was to be interred with him would be placed in the guarded tombs. To prevent the pyramids from leaking during the rainy season, the pyramids were sealed with sand or marble or some other material of the pharaoh’s choosing. If they did not seal the pyramids they would eventually fill with water and decay everything inside. This process was started at the top of the pyramid and the workers worked down the sides until they reached the bottom.

Ethical Legal Dilemma Advanced Practice Nursing Case Study II Essay

Ethical Legal Dilemma Advanced Practice Nursing Case Study II Health insurance policies have set limits on what services will be paid for with a terminally ill person in the home and these limitations may conflict with the nurse’s obligation to provide care for the terminally ill patient (Fry, Veatch & Taylor, 2011). Speaking with the family of a 59 year old male with his only history being terminal lung cancer that has metastasized to the brain, they express concern that they are beginning to have increase difficulty managing this condition. The patient is receiving hospice currently in the home, but the insurance company will not cover both hospice and respite services to assist the family. Community nurses working in the homes of dying patients often encounter many forms of ethical dilemma and they need support in this demanding situation that arises during the end of a patient’s life in the home (Karlsson et al. , 2010). The community nurse is a professional to whom the patient and family turn when they have questions or want to discuss plan of care and treatment options at a critical time in the patient’s life when personal assistance is required (Erlen, 2005). Speaking with the family (son and daughter), it is now found that the patient is now incontinent of both stool and urine and they are now limiting his intake of food and fluid in the afternoon and evening, so that their father doesn’t â€Å"lay in his own wastes throughout the night†. The patient has now developed an excoriated perineum and it appears that further skin breakdown is imminent. The patient has become increasingly weak, and has fallen several times over the last few days. He requires total care with all ADL’s and IADL’s and the family verbalizes being overwhelmed with what their father requires. The patient is receiving hospice for medication administration for agitation and pain as well. Both son and daughter are at risk of losing their jobs related to missing work in order to take care of their father. The son works day shift and the sister works afternoon shift. They have each decided to return to work and this will cause their father to be left alone for almost two hours each day. This could be a case of negligence, where there is a failure to exercise a standard of care and it can be alleged when a person fails to act when a duty exists. There are five elements required to establish a case of negligence: the existence of a legal duty to exercise reasonable care; a failure to exercise reasonable care; cause in fact of physical harm by the negligent conduct; physical harm in the form of actual damages; and proximate cause, a showing that the harm is within the scope of liability (Cornell University Law School, n. d). Negligence falls under tort law and could be criminal. According to Collins English Dictionary (2009) negligence or mal-practice is defined as any immoral, unethical misconduct or neglect of a health care professional. The patient is receiving care at home from Hospice for pain and agitation medication management, which is not sufficient. There is no absolute method to avoid lawsuits; however, prevention of this case could have occurred prior to discharge with proper education of the family of their options for care regarding their father. Detailed explanation of what care their father may need as the end of life is near, may have steered the family to make alternative arrangements for their father. Hospice will have a duty to educate the family of the possible act of negligence and it will be the duty of the hospice workers to report this act made by the family, by following their policies and procedures, which will be their best defense (Grant & Ballard, 2011). Further discussion has shed light on the possibility of Human Rights being violated, under the Affordable Car Act. This is due to the patient’s insurance declining to pay for needs at home. This law alleviates according to Gable (2011) some of the hardships forced on the public’s health for those with insufficient availability of health insurance or access to health care. The Affordable Care Act bans insurance companies from placing lifetime dollar limits on health benefits, which will prevent individuals suffering from chronic diseases from having to worry about going without treatment because of their lifetime limits and it restricts the use of annual limits and bans them completely in 2014 (U. S. Department of Health and Human Services, n. d. ). The ethical principle that will be violated here is the respect for person and the concept of deontology. Deontology means that some behaviors are our duty, whether there is benefit or not (Fry, Veatch & Taylor, 2011). The Stanford Encyclopedia of Philosophy (2012), says that deontology is within the moral theories that guide and assess our choices of what we ought to do and what type of person we should be. Again, proper education to the family, prior to discharge of this patient and by the nurses within the hospice agency could have avoided this occurring. Respect for person involves autonomy, but not all individuals are able to acting autonomously. This requires the ability to set goals and make choices, and this may be compromised at times in a person’s life. Defined by the Belmont Report, respect for persons requires that these vulnerable individuals be offered special protections during periods when they cannot act autonomously. This is also a major emphasis of the principle of justice which requires that the vulnerable be extended special protections with regard to the distribution of the benefits and burdens of research (Yale Human Subject Research Resource & Education Program, 2006). Legal reasoning is evident in two forms, legislative drafting and application of rules to cases and it involves an acceptance and spirit of working within law, which gives it some bias towards maintaining existing rules (Peterson, n. d. ). This does not always mean that law is always just and practical, and judges avoid applying rules that would result in less than desired outcomes. According to Peterson (n. d. ), legal reasoning contains many examples of efforts to changing the legal system and returning to the law making process. Coherence in legal reasoning is where law makes sense as a whole, and is a form of supportive rationality (Bertea, 2009). The coherence part of legal reasoning may be weaker than the logical part. Coherence of a set of legal norms is made by there being a realization of some common value or some common principle (Dickson, 2010). Logic in legal reasoning is the reasoning involved in interpreting constitutions, statutes, regulations, balancing fundamental principles, adopting and modifying legal rules, while applying those rules to cases and evaluating evidence, prior to making decisions (Walker, 2007). Case law is the legal principles embodied in judicial decisions that are derived from applying areas of law to the facts of individual cases. Case law is a dynamic and constantly developing body of law, where each case contains part of the facts of the controversy and an explanation of how the judge arrived at a conclusion (The Free Dictionary by Farlex). Lastly is legal analysis, which requires proving each element of a rule to be true or false and it refers to a statement by a court, judicial officer, or legal expert as to the legality or illegality of an action, condition, or intent (Connelly, n. d. ). The function of ethical reasoning revolved around the fact that much of human behavior has consequences for the welfare of others. People can act toward others in such a way as to increase or decrease the quality of their lives and we are capable of helping or harming. We are empathetic and therefore can recognize when we are doing one or the other. The role of ethical reasoning is to decipher acts that either enhances the well-being of others and those that harm or diminish the well-being of others. Developing one’s ethical reasoning abilities is crucial because there is in human nature a strong tendency toward egotism, prejudice, self-justification, and self-deception which has sociocentric influences (Elder & Paul, 2011). The problem of pseudo-ethics is that one cannot develop as ethical persons if we cannot face the fact that everyone is prone to egotism and prejudice. Flaws in human thinking are the cause of much human suffering and only developing fair-mindedness, honesty, integrity, self-knowledge, and deep concern for the welfare of others can provide foundations for sound ethical reasoning (Paul & Elder, 2009). According to Paul and Elder (2009), ethical reasoning involves doing what is right while avoiding selfish desires and to live an ethical life, is to develop command over our native egocentric tendencies. The elements of ethical reasoning include awareness, independent problem solving, supported problem solving, and decision and outcome evaluation, while effective ethical reasoning requires sensitivity, problem solving skills, and the motivation and determination to act on decisions (Kenny et al. , 2007). The logic of ethical reasoning involves moral theory derived from meta-ethics and evolutionary ethics. The fundamental problem is that evolutionary ethics is a scientifically based theory while meta-ethics is a philosophically based and logic related to human behavior is cannot convey the complexity of human experience, so moral terminology such as good and moral have evolved from billions of social issues over centuries of time that are related to human behavior (Bromberg, 2011). The advantages and disadvantages of ethical reasoning start with the fact that ethical reasoning assumes that everyone will make choices that will cause no harm. This would mean that an ethical society will prohibit unethical actions, but ethical reasoning excludes actions that are based on spiritual or social customs and does not persecute any specific group for their beliefs. Ethical reasoning is meant to determine actions that are in the best interest of everyone, but the course of action is not always clear-cut. Ethical reasoning is simple, all things are not equal, and determining the true ethical route can be difficult and subjective (Mayers, n. d. ). Summary Some cultures continue to practice rituals that are illegal in other counties. Those things that are ethically acceptable in one culture, many times aren’t with other cultures. Laws are based on rules within cultures. Rules are things that citizens must obey in order to prevent persecution by governing authority. Ethical reasoning is based on what people believe is morally right or wrong, whereas legal reasoning is based rules made within cultures. Many times things that are illegal coincide with things that are believed to be unethical within a culture; however, an illegal act by a health care practitioner is always unethical, but an unethical act is not necessarily illegal. Ethics involves standards of behavior and the concept of right and wrong, over that which is legal in a given situation. Moral values are formed through the influence of the family, culture, and society and form one’s ethical reasoning basis (Judson & Harrison, 2012). I feel any ethical decision model must involve individual employees, as well as their supervisors in order to be effective. Shared decision making, between health care professionals, is vital to arrive at what best meets the employee’s needs. I think an ethical reasoning tool needs to involve the employee and the supervisor so the problem can be addressed. The use of an integrative model can develop confidence and justification in making ethical decisions. Preferences and values come into effect during the process of an integrated ethical decision making model and principles of patient-centeredness and shared-decision making must be integrated (Sestini, 2010). An integrated model of ethical reasoning highlights the integration between ethics and decision making, where ethics is a tool that brings positive aspects of the reasoning process. The model is composed of three major elements: the ethical component; the decision making component; and the contextual component (Grundstein-Amado, 1991). Park (2012), reviewed available structured ethical reasoning and decision-making models and developed an integrated model consisting of six steps: 1. the identification of an ethical problem 2. the collection of additional information to identify the problem and develop solutions 3. the development of alternatives for analysis and comparison 4. the selection of the best alternatives and justification 5. the development of diverse, practical ways to implement ethical decisions and actions 6. the evaluation of effects and development of strategies to prevent a similar occurrence. The best ethical reasoning should be determined by putting efforts from all health care professionals involved and although it will not guarantee ethically right or good decisions, it will likely improve a process and outcomes of clinical ethical decisions (Park, 2012). Applying this model to the situation of 59 year old male with his only history being terminal lung cancer that has metastasized to the brain. Applying the chosen model: 1. the identification of an ethical problem: They have each decided to return to work and this will cause their father to be left alone for almost two hours each day. 2. the collection of additional information to identify the problem and develop solutions: families concerns: Increased difficulty managing this condition Patient is receiving hospice but the insurance company will not cover both hospice and respite services to assist the family. patient is now incontinent of both stool and urine and they are now limiting his intake of food and fluid in the afternoon and evening patient has now developed an excoriated perineum The patient has become increasingly weak, and has fallen several times over the last few days. requires total care with all ADL’s and IADL’s and the family verbalizes being overwhelmed 7. Both son and daughter are at risk of losing their jobs related to missing work in order to take care of their father. 3. the development of alternatives for analysis and comparison: this would involve the family’s input into the situation. Possible another family member could be available for the two hours. There could be a possibility to withdrawal from hospice and pursuing home health care to be used for respite services. 4. the selection of the best alternatives and justification: Again this would have to involve the family’s input to see what best meets their needs, as well as their father’s needs. Justification to the family regarding their father being left alone for two hours at a time, as well as withholding fluids and food from him can be done through education. 5. the development of diverse, practical ways to implement ethical decisions and actions: Deontology means that some behaviors are our duty, whether there is benefit or not (Fry, Veatch & Taylor, 2011). This is also a major emphasis of the principle of justice which requires that the vulnerable be extended special protections with regard to the distribution of the benefits and burdens of research (Yale Human Subject Research Resource & Education Program, 2006). As a case manager, I need to work with family on awareness, independent problem solving, supported problem solving, and decision and outcome evaluation. 6. the evaluation of effects and development of strategies to prevent a similar occurrence: this would be done post intervention, and then determination could be made of whether the end result was effective. Evaluating the effects of the interventions will allow the health care professional to adapt future encounters with similar situations. Recommendations Further research revealed the U. S. Department of Health & Human Services said federal hospice investigations have increased drastically over the last few years. A Medicare oversight report in 2009, found nearly a third of hospice patients were not getting services of treatment in care plans, nor were they getting visits providers had promised to provide (Bloomberg News, 2011). This would lead to the first recommendation to the family. It can be recommended that they ask the visiting hospice to review the overall care plan with them. The case manager needs to ask for a copy of the care plan, so it can be reviewed with the family. Once the care plan is reviewed, services being received can be reviewed to match what is promised to take place. A second recommendation to the given situation includes involvement of the case manager. The case manager needs to ask the family to discuss options with the patient and consider his preferences as well as special physical, emotional and psychosocial needs. A final recommendation is that the case manager assist the family to evaluate how much support can be provided by other family members and friends. For help determining the best option, they may need to talk with the health care team. Caring for their father, according to research, may have left them no time for self-care; drained them of energy and enthusiasm; and affected interactions with other family and friends (Joad et. al, 2011). References Bertea, S. (2009). The argument from coherence. Available at http://ivr-enc. info/index. php? title=The_Argument_from_Coherence Bloomberg News. (2011). Hospice care grows as do patient negligence concerns. Retrieved from http://www. ltlmagazine. com/news-item/hospice-care-grows-do-patient-negligence-concerns Bromberg, S. E. (2011). The evolution of ethics: An introduction to cybernetic ethics. Retrieved from http://www. evolutionaryethics. com Collins English Dictionary (2009). Negligence. Retrieved from http://dictionary. reference. com/browse/malpractice. Connelly, A. (n. d. ). Legal analysis and reasoning from precedent. Retrieved from http://www. law. uky. edu/files/docs/clinic/legal_analysis. pdf Cornell University Law School. (n. d. ). Negligence. Retrieved from http://www. law. cornell. edu/wex/negligence Dickson, J. (2010). Interpretation and coherence in legal reasoning. In The Stanford Encyclopedia of Philosophy online. Retrieved from http://plato. stanford. edu/archives/spr2010/entries/legal-reas-interpret/>. Elder, L. & Paul, R. (2011). Ethical reasoning essential to education. Retrieved from www. criticalthinking. org Erlen, J. (2005). When patients and families disagree. Orthopedic Nursing, 24(4), 279–282. Fry, S. , Veatch, R. , & Taylor, C. (2011). Case studies in nursing ethics (4th ed. ). Sudbury, MA: Jones & Barlett Learning. Gable, L. (2011). The Patient Protection and Affordable Care Act, Public Health, and the Elusive Target of Human Rights. Journal of Law, Medicine & Ethics. 39(3), 340-354. doi:10. 1111/j. 1748-720X. 2011. 00604 Grant, P. D. , & Ballard, D. C. (2011). Law for nurse leaders: A comprehensive reference. New York, NY: Springer Publishing Company. Grundstein-Amado, R. (1991). An integrative model of clinical-ethical decision making. Theoretical Medicine, 12(2), 157-170. Retrieved from http://link. springer. com/article/10. 1007%2FBF00489796 Joad, K, Mayamol, T. C. & Chaturvedi, M. (2011). What does the informal caregiver

Cold War Era and Threats to American Families

Cold War Era and Threats to American Families Cold war is the period of tension between America and the Solviet Union which lasted from 1945 and 1980. Destruction of Hiroshima and Nagasaki by an atomic bomb marked the end of World War II and the beginning of the cold war.Advertising We will write a custom essay sample on Cold War Era and Threats to American Families specifically for you for only $16.05 $11/page Learn More It developed after the world war two, and this was due to mistrust between the two states. America was a communist state, and feared the Solviet Union which was an anti-communist state, slowly coming into America (Farber, 1994). There was a widespread belief among the American people that worldwide control by the Russians was a reality. It was a period when weapons of mass destruction were a major concern and Americans were feared of owning the most powerful in the world (Marilyn Robert, 2002). The cold war period was characterized by an intensified tension over a long period of time; in 1949 the United States and USSR had already acquired nuclear capability. Due to the external military threat by the communists, there was a dire need to give Americans enough protection. National politicians started to warn the citizens of the threat. They were, therefore, told to be vigilant against the communists. These warnings were even accelerated by other levels of society including the media, pastors, opinion makers and community leaders (Harrison Thomas, 2008). Citizens had a role to play in protecting communism as citizen soldiers by building a cold war home front. In addition to this, there was an increased promotion of codes of conduct and enacting of public policies by the politicians to boost the American homes. There was a heightened sense of fear and insecurity among the Americans impacting the society to a great extent. Most of the American people were in agreement with their leaders that the best ways to avert the dangers of the cold war were through family sta bility (Harrison Thomas, 2008). These beliefs transformed the American society are vividly beyond the expected boundaries. There was an immense rush in the society towards marriage and child bearing thus; lowering the age of marriage for both men and women (Elaine, 2008). It reduced the class lines and increased racial divisions. The white middle and working class remained prosperous due to their ability to access suburban good life. The black Americans were excluded from suburbia by racial division that remained camouflaged in the aura of unity.Advertising Looking for essay on history? Let's see if we can help you! Get your first paper with 15% OFF Learn More Bonding helped the families feel at ease and protected against dangers of the outside world. As a family issue was becoming a major issue, couples had limited things in their lives, which included some consumer goods, their sexuality and privacy. Furthermore, divorce cases declined sharply as compared to other years (Harrison Thomas, 2008). Couples who divorced remained long enough together amid the security crisis and their family roles remained in place. Since young people had started marrying at a very young age, there was an increment in birthrates as compared to the last hundred years which had recorded a decline (Elaine, 2008). Baby boom was recorded that lasted for more than two decades. Although home was seen as a refuge and hope of freedom, economic hardships had ripped most of the families. Union of many families during the period helped them to have a sense of security. The danger of nuclear threat was universal and could not be avoided. The best I could do to protect my family is giving them sense of love and protection so as to ease their minds. I would ensure that my family is knowledgeable about the situation, and I could have advised them to take the suitable cover against the threat presented to them. It is a matter of fact that unity is the best remedy during h ard times; I would have ensured that my family is united and peaceful. In conclusion, although the cold war was different from any other physical war, it impacted extensively on American society. Society had to change in realms of population growth and numbers of divorce cases. Perhaps a question that crosses our minds is why did the young generation resort to early marriages? References Elaine, T. (2008). Homeward bound: American families in the Cold War era. New York: Basic Books Farber, D. (1994).The Age of Great Dreams: America in the 1960s. New York: Hill and Wang.Advertising We will write a custom essay sample on Cold War Era and Threats to American Families specifically for you for only $16.05 $11/page Learn More Harrison, C. Thomas R. (2008). Power and Society: An Introduction to the Social Sciences. London: Thomson Wadsworth. Kyle, A. (2005). Manhood and American political culture in the Cold War: Cultures. Routledge. Hardcover,  Routledge Maril yn, B. Robert, B. (2002). A companion to the Vietnam War. Blackwell companions to American history. New York: John Wiley Sons.

Design Patterns - Behavioral, Creational, Structural Research Paper

Design Patterns - Behavioral, Creational, Structural - Research Paper Example There are several classifications of design patterns - this essay focus on three designs, including memento for behavioral patterns, singleton for creational patterns and lastly facade for structural patterns. Memento Pattern This is a software design pattern that has the capability of bringing back an object to its initial state. As a pattern, it allows the initial state of an object to be restored without interfering with the rules of encapsulation. This means that the arising object can be designed appropriately, though it can be restored to its original state. Therefore, memento pattern has the ability of restoring the internal state of an object without breaking the encapsulation rules. As a behavioral pattern, Memento indicates the manner through which communication between entities or classes is achieved (Schmidt, 1997). Basically, the design pattern is popular in applications with â€Å"undo’ functionality. Memento pattern has two participants: the caretaker and the o riginator. The originator restores memento to its internal state while the caretaker guarantees memento safekeeping. According to Gamma et al. (1995), memento does not allow access to other objects other than originator. It has two interfaces, including narrow and wide interface. Caretakers only find the narrow interface and pass memento to other objects while the originator finds the wider interface through which it allows access to data that enabling restoration of the initial state. Benefits and drawbacks Memento pattern has chain of responsibilities that offers great flexibility especially when processing an application. In this case, it manages complex events by dividing the responsibilities into simpler elements that allows a set of classes to behave as a whole. However, the flexibility of this pattern is hard to develop, debug and test. This is because the chain becomes extremely complex. In addition, failure to plan for varied forwarding possibilities could result to message s that lack a handler, hence failing to attract any response. Singleton pattern Singleton is a creation design pattern that ensures only one object of a given class is created. It has only one class that is accessible by clients from identifiable access points. The single class must be extensible and the clients should easily use extended instances without alteration to their codes. Therefore, this pattern is particularly useful when a single object is needed to manage actions across a system. Singleton ensures efficiency when creating numerous identical objects and it uses a particular algorithm that requires a single point of control to interact with a resource that cannot be shared. Benefits and drawbacks The singleton pattern exerts control over the instantiation process and therefore this class has the flexibility to change the instantiation process. In addition, singleton pattern ensures that every object accesses the singleton object and preventing other objects from instanti ating their own copies. However, weaknesses associated with singleton pattern includes introduction a global state into the program. It allows uncontrolled access to the program hence being one of the most used patterns. In this regard, programs that are heavily used are difficult to test. This is because it is not possible to test it without testing other

Accounting Regulation of Extractive Industries Essay

Accounting Regulation of Extractive Industries - Essay Example ay a critical role in global economic and political relations and include companies in oil, gas and mining industries such as Exxon Mobil, Anglo American and Royal Dutch/Shell Group. The economic power of extractive industries is evidenced by the US $ 211 trillion in profits that was recorded by 20 extractive industries in 2005 compared with United States GDP of US $ 11 trillion in 2005. Efforts to regulate the extractive industry were initiated by the International Accounting Standards Committee (IASC), now the International Accounting Standards Board (IASB) in 1998 in order to address the problem associated with differing accounting practices used by the companies in the sector (Cortese, Irvine and Kaidonis, 2010). The previous accounting standards such as IAS 16 on property, plant, and equipment and IAS 38 on intangible assets did not address the thorny issue of accounting for extractive operations in oil, gas and mining operations. In this case, IFRS 6, exploration for and evaluation of Mineral Resources was released in 2004, but experts in the field claims that the standard codified the existing industry practice and provided the companies with flexibility to continue reporting in their preferred mode (Nobes & Parker 2008). The impact of the reported profits can be substantial and thus IASC sought to address the discrepancies at the international level. Proponents of full cost method stressed the need to retain the two methods and an Ad Hoc Committee on full costing consisting of various industry bodies and players was constituted (Nobes & Parker 2008). Companies in extractive industries have global operations and diversity in their accounting and reporting has evolved in leading mining regions such as South Africa, Canada, the United Kingdom, Australia and the United States (US). Wiecek & Young (2010) explains that the economic importance of extractive industries led IASC to recognise the need for an international accounting standard that would provide

Old Testament and New Testament Essay Example | Topics and Well Written Essays - 1500 words

Old Testament and New Testament - Essay Example This essay analyzes and then compares the passages from the Old and the New Testament. The fact of similarities between them is well established, if one considers the fact that the prophecies of the Old Testament were fulfilled in the New Testament. The several ways that the passages of the New Testament and the Old Testament bear similarities shall be elaborated in this paper. Events like the Passover and the Last Supper justify the similarities between the New Testament and the Old Testament. The lives of great people in the Bible like Moses, David, Elijah, John and Jesus can also be used as a basis for comparison between the Old and the New Testament. The Last Supper was also a feast of unleavened bread just like the Passover in the book of Exodus. This is a clear sign that the Last Supper of Jesus with his twelve disciples evolved from the Passover in the book of Exodus. Another way that the New Testament fulfilled the prophecy or interpreted the message of the Old Testament was in the life of Moses. From the events that took place in the Bible and the characters of notable people in the Bible, it has been clearly shown that the New Testament is an interpreter of the Old Testament. The Old Testament and the New Testament were written by different authors that lived through different timelines, but the fact that the Bible as a whole was inspired by God shows that there must be a link between the Old Testament and the New Testament and it is this link that has been proven and established in this paper.

Reading and Writing with an Attitude Essay Example | Topics and Well Written Essays - 250 words

Reading and Writing with an Attitude - Essay Example Ultimately, although procrastination can adversely affect all forms of production and output, it is an especially bad habit with regards to the process of writing due to the fact that the writing process cannot be completed in a single sitting. As a function of the reading, planning, outlining, drafting, and revising process, it is necessary to budget a great deal of time for the writing process in order to make sure that it is complete and relevant to the subject matter or requirements that have been set out. Moreover, proofreading the finished product also takes time and seeking to make any last minute additions for relevance takes time as well. With regards to how I acquired this particular shortcoming, it can be simply enough understood that it was acquired as a result of improper time management early in my scholastic endeavors. With regards to the impacts that it has had, these can be understood to be wholly negative. Ultimately, as a means of correcting this habit, it has been necessary for me to seek to meticulously budget my time so that procrastination in the writing process cannot even be a

Vehicle Anti-lock Braking Traction Control

Vehicle Anti-lock Braking Traction Control Understand vehicle anti-lock braking traction control and Integrated dynamic stability control systems.   Introduction I have learned that the anti-lock braking systems (ABS) are electronic systems that monitor and control wheel slip during vehicle braking, as well as the ABSs can improve vehicle control during braking, and reduce stopping distances on slippery road surfaces by limiting wheel slip and maintaining lockup. Also, the reducing wheel spin improves the vehicle stability and control during braking, since stability increases as wheel slip decreases. Assessment Criteria 2.1 It is correct to assume that due to the increased loads on steered wheels and wider tyres there is a large effort required at the steering wheel it makes the driver ability to control the car very tiring and difficult, especially when steering the vehicle at very low speeds like parking and reversing. There are improvements such as an increase in the mechanical efficiency of the steering system or lowering steering box ratios to help reduce the driver fatigue, however if the steering mechanism is not limited the increased number of turns made by the steering wheel to move it from lock to lock becomes disturbing. When the steering effort exceeds a safe maximum, a method must be found and power-assisted steering (PAS) seems to answer certain requirements: 1. It must be fail-safe, if the power system fails, the driver must still be able to retain effective control. 2. The degree of assistance must be proportional to the effort applied by the driver, and the driver must be able to continue to have the feel of the wheels. On light vehicles, hydraulic and electronic power the assistance is used to help the driver steer the vehicle. Hydraulically operated power-assisted systems run by a constant pressure or constant flow layout. The diagram below, shows the essential components required to operate a constant flow system with rack-and-pinion steering system. In addition to the normal steering components, the system requires: A pump, and A control valve. Hilliers (2012) Diagram 1 showing the PAS System (Power-Assisted Steering) in a hydraulic system: Hilliers (2012) The hydraulic pump shown has the reservoir for the hydraulic fluid as the contained component of the design. The reservoir supplies the hydraulic fluid to the power-steering control valve that is joined to the pinion shaft. When it is driven on a straight ahead position the valve is placed in a neutral position, allowing the fluid to go around continuously through the hydraulic circuit. The fluid pressure acting on the power cylinder is equal so no assistance is given to the steered wheels. When the steered wheels are turned through the action of the driver giving movement to the pinion shaft and control valve, then the torsion bar connected to the control valve to the pinion shaft will twist. The torsional movement of the control valve will direct fluid pressure from the pump through to one side of the power cylinder. When the fluid pressure is acted upon on the power cylinder it creates a force to the side of the cylinder providing the necessary assistance to the driver in turning the steered wheel, the control valve normally sits in the neutral position, thus providing equal pressure to both sides of the power cylinder and requiring no longer the assistance is required. Hilliers (2012) The hydraulic pump is an eccentric rotor or also named a vane-type driven by the vee belt from the engine crankshaft. Some of the hydraulic pumps are put in place onto the new cars that are electronic to improve on the performing of the engine by not drawing power from the belt via the crankshaft. The pump is supplied by hydraulic fluid from either an integral reservoir or a remote arrangement. The type of fluid used is usually an automatic transmission fluid (ATF) which has low viscosity. The pressure is created in the pump by the rotation of the vane or rotor, the fluid under pressure is sent to the spool control valve. The maximum pressure that the pump can produce is normally around 7MNm squared or 1,0001bf in squared. This is controlled by a pressure relief valve. The normal pressure is generally proportional to the engine speed because of the direct linkage with the power-steering pump. Any excess pressure released by the pressure relief valve is redirected back to the fluid reservoir. Nowadays in most modern production vehicles a far on power steering system will also include features such as a system to alter the power assistance depending on the road and engine speed. This is done by fitting a valve in the system allowing full force during low speed manoeuvring increasing the assistance for the driver. During high road speeds and engine speeds the valve will modulate the pressure through the hydraulic steering system limiting the amount of assistance and enabling the driver to feel the road and the steered wheels. Vehicle handling is very much improved and so is the stability of the car. The control valve, shows a kind of rotary motion type control valve which is regulated by a torsion bar which is positioned between the steering shaft and the pinion of the steering box. The valve is commonly called a rotary control valve which is a shaft with a series of flutes encased by a sleeve which has the same number of internal axial grooves. The ports situated around the outside of the sleeve and shaft pass the oil from the pump supply to the lines connected to the ram chambers. The operation principles of the PAS system provide the following control functions: Road speed sensitive power assistance Assisted steering return Both functions are the result of the motor voltage control by the ECU. The ECU determines the voltage supply to the motor based on the following data: The force applied to the steering wheel by the driver The vehicle speed The steering angle position and The speed of steering angle change The torque sensor measures the input force applied by the drive, when the driver turns the steering wheel the torsion bar between the two halves of the steering column will twist. The amount of twist is proportional to the force applied. Diagram 2, The Rotary-type control valve operation Hillers (2012) Assessment Criteria 2.2 The active suspension system is now being commonly used for riding comfort, running safety, they control the vertical movement of the wheels relative to the chassis or vehicle body with an on-board system, rather than in a passive suspension in which the movement is being determined completely by the road surface. Active suspension may be generally divided into two main classes, pure active suspension and adaptive semi-active suspension. Active suspensions only vary the shock absorber firmness to match changing road conditions, the active suspension use some type of actuator to raise and lower the chassis independently at each wheel. The technologies allow the manufacturers nowadays to achieve a greater ride of quality and car handling by keeping the tyres perpendicular to the road in corners allowing for better traction control. The on-board computer detects body movement from the sensors throughout the vehicle and using this data controls the action of the active and semi-active suspension. Active suspension eliminates body roll and pitch variation in most driving situations including cornering, accelerating, and braking. The active suspension also known as computerized ride control have components like a computer or two ECU, adjustable shocks and springs, a series of sensors at each wheel and right through the car and an actuator or servo at each shock and spring. The components may vary slightly from manufacturer to manufacturer. The active suspension works by constantly sensing changes in the road surface and feeding that information, via the ECU to the outlying components. The components act upon the system to modify its character adjusting shock stiffness, spring rate and to improve ride performance drivability and responsiveness. Diagram 3, Active Suspension: Extremetech.com (2016) The principles of operation of an active suspension relies entirely on the computer (ECU) which detects body movement from the sensors located throughout the vehicle. The hydraulic pressure to the servo is supplied by a high pressure radial piston hydraulic pump. There are 13 sensors continually monitoring the body movement and vehicle level and supply the ABS controller with new data every ten milliseconds. Four level sensors one at each wheel measures the longitudinal and transverse body acceleration. At each hydraulic cylinder a pressure sensor monitors the hydraulic pressure. As the ABS controller receives and possesses data, it operates four hydraulic servos, each mounted in series on a spring strut, besides each wheel. Almost immediately the servo regulates the suspension which generates counter forces to body lean, dive and squat during several driving manoeuvres. There is a suspension strut which consists of a steel coil spring and a shock absorber connected in parallel. The Active Body Control system (ABC) also allows for self-levelling suspension which raises and lowers the vehicle in response to the ever-changing load. Every vehicle equipped with ABC has an ABC Sport button which allows the driver to adjust the suspension range for different driving style preferences. The feature allows the driver ton adjust the suspension to maintain a more level ride in a more demanding driving conditions. Motor-car.co.uk (2016) Assessment Criteria 2.3 The steering angle sensor (SAS) is a critical part of the ESC system that measures the steering wheel position angle and rate turn. A scan tool can be used to get the data in degrees. The SAS, which is located, in a sensor cluster in the steering column. The cluster always has more than one steering column. The ESC module must receive two signals to confirm the steering position. The signals are often out of phase with each other. The analog SASs are very much alike to the throttle position sensors, SASs are wired with a 5-volt reference, chassis ground and signal output and can be tested via a port under the steering column. When the steering wheel is turned, the SASs produces a signal that varies between 0 and 5 volts as the wheel is turned 360 degrees. It is possible to observe the 0 to 5-volt signal with meters connected to the SAS sensors. When the wheels are straight forward the sensors reads about 2.8v and 4v. If the readings are the same the two sensors could be shortened tog ether. Most vehicles produce a positive voltage turning right and a negative voltage turning left. A multi-meter could be used to test the voltage signal produced by the SAS sensors. Knowyourparts.com (2016) The self-levelling and ride control systems have fault diagnosis in most vehicles for they incorporate a self-diagnostic facility that will illuminate a malfunction indicator lamp (MIL) if a fault is detected. If you suspect a fault with a self-levelling or ride control system a visual inspection is normally conducted for wear and tear. A scan tool is connected to the diagnostic connector and fault codes are retrieved. Diagram 4, examples of suspension system fault codes: Stoakes Graham (2012) Antilock braking systems (ABS) are electronic systems that monitor and control wheel slip during vehicle braking. ABSs may improve vehicle control during braking and reduce stopping distances on slippery road surfaces by limiting wheel slip and minimizing lockup. Reducing wheel slip improves vehicle stability and control during braking, for stability increases as wheel slip decreases. A simple braking system consists of a master cylinder and four wheel cylinders. When the brake pedal is pressed the piston in the master cylinder forces the liquid out of the cylinder. The liquid pressed the two pistons in the wheel-cylinders outwards. The two pistons push the brake shoes outwards. One major component of the anti-lock braking system includes the master cylinder, when the pedal is pressed the primary piston moves to the left, when it crosses the bypass port the liquid is forced along the pipe lines to the wheel cylinders. When the pedal is released the primary piston is moved backwards. Diagram 5, Inside the Master Cylinder: Auto.howstuffwirks.com (2016) The principles of the ABS system are the following: The skidding and loss of control is caused by the locking of the wheels. The release and reapply of the brakes pedal will avoid the locking of the   Ã‚   wheels which in turn avoids the skidding. This is exactly what an antilock braking system does. The pressure modulation works when the brake pedal is pumped or pulsed, the pressure is quickly applied and released at the wheels. This is called pressure modulation, which works to prevent the wheels from locking. The ABS system can modulate the pressure to the brake as often as 15 times per second. ABS precisely controls the slip rate of the wheels to ensure maximum grip force from the tyres and therefore ensures easy manoeuvre and stability for the driver of the vehicle. The slip rate during ABS operation varies, the target slip rate can be from 10 to 30%. 0% slip means the wheel is rolling freely, while 100% means the wheel is fully locked. A slip rate of 25% means the velocity of a wheel is 25% less than that of a freely rolling wheel at the same vehicle speed. Diagram 6, showing a Lateral and Longitudinal Mu-Slip Curve: Freerebublic.com (2016) Hydraulic components of the ABS system include an accumulator, which is used to store the hydraulic fluid to maintain high pressure in the brake system. The antilock hydraulic control valve assembly controls the release and application of the brake system pressure to the wheel brake assemblies. The booster pump is used to provide pressurized hydraulic fluid to the ABS (Antilock braking system). The booster/master cylinder assembly is needed to modulate hydraulic pressure in the wheel circuit during the ABS operations. The fluid accumulator temporarily stores the brake fluid that is removed from the wheel brake unit during the ABS cycle. A hydraulic control unit may have one pump and one motor or it may have one motor and two pumps. The main valve is made up of a two-position valve and is opened only in the ABS mode. A modulator unit controls the flow of pressurized brake fluid to the individual wheel circuits. The solenoid valves located in the modulator unit and are electrically operated by signals from the control module. Diagram 7, typical Toyota ABS control relay wiring diagram: Wiringdiagrams21.com (2016) The electrical/electronic components consist of the following: ABS control module, which monitors the system operation and controls    the antilock function when needed. Brake pedal sensor, is the function to switch on the brake lights to alert    other vehicles that the car is slowing down and is going to stop. The wheel speed sensor, are generally used for sensing the wheel   Ã‚   speed. There are three different types of anti-lock braking system, firstly the four channel, four sensor ABS, this is the best scheme, there are speed sensors on all four wheels and a separate valve for all four wheels. Secondly, the three channel, three sensor ABS, this scheme is commonly found on pick-up trucks with four wheels ABS, has a speed sensor and a valve for each of the front wheels, with one valve and one sensor for both rear wheels. Thirdly, the one channel, one sensor ABS, has one valve which controls both rear wheels and one speed sensor located in the rear axle. The features and benefits of ABS system include the following: Features   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Benefits Control of steering.  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Increase steering ability and   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   vehicle stability during   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   braking Fail-safe electrical/ electronic  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   If the electrical/electronic    System.  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   system fails, the ABS is shut   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   off. Traction control.  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   It is an optional feature that   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   controls excessive wheel   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   spin during acceleration. ABS malfunction indicator lamp.  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   It informs the driver or   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   technician that there is ABS   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   fault. Diagram 8, the Operation under different conditions:   Slideshare.net (2016) The design goals of the ABS system are to: Attain minimum stopping distance Maintain stability and steering ease The design solution includes the following: To develop a system that rapidly modulates the braking force under hard braking conditions to: Maintain the ideal tyre slip percentage to maximise braking force (=15%), recalling that Fbrake = Ubn. To permit the vehicle to be steered with stability maintained by preventing skidding. The automatic traction control system applies to the brakes when a drive wheel attempts to spin and lose traction. The system works best when one drive wheel is working on a good traction surface and the other is not. The system also works well when the vehicle is accelerating on slippery road surfaces especially when climbing hills. Diagram 9, A block diagram of traction: Sine.ni.com (2016) The benefits of traction control are avoiding are: It improves driver safety Less sudden twists and turns Fewer slippage of the wheels Fewer stopping distances Mostly integrated with powerful cars Better gripping of the car. The traction TCS control system is used to prevent wheel spin and loss of traction. These sorts of systems help to prevent the tyres from breaking loose during sudden acceleration on slick surfaces. They are usually an add on to the ESC electronic stability control system to control and restore traction on the slippery roads. The TCS and ABS systems share the same wheel speed sensors. The TCM program requires two additional solenoids in the hydraulic modulator assembly. The solenoids isolate the brake circuits to the drive wheels from the non-drive wheels during wheel spin. An electric pump and an accumulator are used to apply the wheel brake on the wheel that has lost its traction. The systems use an actuator to reduce power at speeds above 30 mph. This is done by closing the throttle on the vehicle with electronic throttle controls retarding the timing and decreasing fuel injector pulse width. If the ABS and traction control light illuminates continuously then the system should be scanned for codes. Most of these systems have a deactivation switch if the traction control is not required. Freeasestudyguides.com (2016) Assessment Criteria 2.3 The service and repair procedures from Land Rover Service Manual: 1. Clean the ABS sensor, smear the sensor with an anti-seize grease and   Ã‚  Ã‚   fit the sensor to the hub. 2. Fit the Allen screw securing ABS sensor and tighten to 8 Nm (6 1b.ft)   Ã‚  Ã‚   tighten to 8 Nm (6 1b.ft). 3. Secure the sensor lead to the suspension arm and suspension turret,   Ã‚  Ã‚   then connect and secure to the multi-plug. Close the cover on the   Ã‚  Ã‚   multi-plug housing. 4. Locate the wheel arch liner and secure with screws. Service and Repair: 1. Release catch and disconnect the ABS modulator multi-plug. 2. Disconnect the multi-plug from the sensor. 3. Position the cloth under modulator to absorb the fluid spillage. CAUTION: Brake fluid will damage paint finished surfaces. If spilled, immediately remove fluid and clean area with water. Ensure that the water does not enter modulator ports. 4. Noting their fitted positions, disconnect 6 brake pipe unions from the   Ã‚  Ã‚   Modulator. 5. Remove belt securing ABS modulator to mounting brake. 6. Release and remove the ABS modulator from mounting brackets to   Ã‚  Ã‚   Modulator and remove bracket. Assessment Criteria 2.4 The stability control system momentarily applies the brakes at any one wheel to correct over steer or under steer. The control unit receives signals from the typical sensors plus a yaw, lateral acceleration (G-force) and steering angle sensor. The vehicle stability control system (VSC) were created to help reduce the amount of wheel slip during acceleration and in harsh driving conditions. The way stability control system works is by having a connection between the live sensors and the anti-lock brake unit. It works by the sensors getting information and processing it through the ECU and sending it to the anti-lock brake system ABS unit. By applying hydraulic pressure through the anti-lock brake-system it may alter the traction of the wheels individually. The advantages of an integrated stability control system are: It allows the driver to maintain directional stability and control over   Ã‚   steering during braking. It is safe and effective. This automatically changes the brake fluid pressure at each wheel to   Ã‚   maintain optimum brake performance. The ABS absorbs the unwanted turbulence shock waves and modulates   Ã‚   the pulses thus permitting the wheel to continue turning under maximum   Ã‚   braking pressure. The disadvantages are: It is very costly The service and repair diagnosis is not simple Maintenance cost of a car equipped with ABS is more. Conclusion Statistics show that approximately 40% of automobile accidents are due to skidding. The problems commonly occur on vehicle with conventional brake systems which can be avoided by adding devices called ABS. If there is an ABS failure, the system will revert to normal brake operation. Normally, the ABS warning light will turn on and let the driver know there is a fault. Reference Extremetech.com (2016) Boses amazing active suspension uses speaker technology [online] Available at: http://www.extremetech.com/extreme/97177-bose-active-supension-moves-toward-market/2 [Accessed: 15th March 2016] Freeasestudyguides.com (2016) TCS Traction Control System [online] Available at: http://www.freeasestudyguides.com/tcs-traction-control-systems.html [Accessed: 15th March 2016] Hilliers (2012) Fundamentals of Motor Vehicle Technology, 6th ed. Cheltenham: London Motor-car.co.uk (2016) Mercedes-Benz Car Active Body Control (ABC) [online] Available at: http://www.motor-car.co.uk/susoension-types/item/14575-car-active-body-control [Accessed: 15th March 2016] Stoakes, Graham (2012) Principles of Light Vehicle Technology, 1st ed. Heinemann: Essex